@as7712:/home/admin$ sudo ethtool -m swp15
Identifier : 0x11 (QSFP28)
Extended identifier : 0xcc
Extended identifier description : 3.5W max. Power consumption
Extended identifier description : CDR present in TX, CDR present in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x0c (MPO Parallel Optic)
Transceiver codes : 0x80 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 100G Ethernet: 100G AOC or 25GAUI C2M AOC with worst BER of 5x10^(-5)
Encoding : 0x03 (NRZ)
BR, Nominal : 25500Mbps
Rate identifier : 0x02
Length (SMF,km) : 0km
Length (OM3 50um) : 20m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 20m
Transmitter technology : 0x00 (850 nm VCSEL)
Laser wavelength : 850.000nm
Laser wavelength tolerance : 10.000nm
Vendor name : WAVESPLITTER
Vendor OUI : 00:00:00
Vendor PN : WS-QS28-AOCLC203
Vendor rev : 1A
Vendor SN : GE1711106005
Revision Compliance : Revision not specified
Module temperature : 24.38 degrees C / 75.88 degrees F
Module voltage : 3.2376 V
Alarm/warning flags implemented : Yes
Laser tx bias current (Channel 1) : 3.624 mA
Laser tx bias current (Channel 2) : 3.814 mA
Laser tx bias current (Channel 3) : 3.878 mA
Laser tx bias current (Channel 4) : 3.560 mA
Transmit avg optical power (Channel 1) : 0.7617 mW / -1.18 dBm
Transmit avg optical power (Channel 2) : 0.7931 mW / -1.01 dBm
Transmit avg optical power (Channel 3) : 0.8043 mW / -0.95 dBm
Transmit avg optical power (Channel 4) : 0.7003 mW / -1.55 dBm
Rcvr signal avg optical power(Channel 1) : 0.0001 mW / -40.00 dBm
Rcvr signal avg optical power(Channel 2) : 0.0001 mW / -40.00 dBm
Rcvr signal avg optical power(Channel 3) : 0.0001 mW / -40.00 dBm
Rcvr signal avg optical power(Channel 4) : 0.0001 mW / -40.00 dBm
Laser bias current high alarm (Chan 1) : Off
Laser bias current low alarm (Chan 1) : Off
Laser bias current high warning (Chan 1) : Off
Laser bias current low warning (Chan 1) : Off
Laser bias current high alarm (Chan 2) : Off
Laser bias current low alarm (Chan 2) : Off
Laser bias current high warning (Chan 2) : Off
Laser bias current low warning (Chan 2) : Off
Laser bias current high alarm (Chan 3) : Off
Laser bias current low alarm (Chan 3) : Off
Laser bias current high warning (Chan 3) : Off
Laser bias current low warning (Chan 3) : Off
Laser bias current high alarm (Chan 4) : Off
Laser bias current low alarm (Chan 4) : Off
Laser bias current high warning (Chan 4) : Off
Laser bias current low warning (Chan 4) : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser tx power high alarm (Channel 1) : Off
Laser tx power low alarm (Channel 1) : Off
Laser tx power high warning (Channel 1) : Off
Laser tx power low warning (Channel 1) : Off
Laser tx power high alarm (Channel 2) : Off
Laser tx power low alarm (Channel 2) : Off
Laser tx power high warning (Channel 2) : Off
Laser tx power low warning (Channel 2) : Off
Laser tx power high alarm (Channel 3) : Off
Laser tx power low alarm (Channel 3) : Off
Laser tx power high warning (Channel 3) : Off
Laser tx power low warning (Channel 3) : Off
Laser tx power high alarm (Channel 4) : Off
Laser tx power low alarm (Channel 4) : Off
Laser tx power high warning (Channel 4) : Off
Laser tx power low warning (Channel 4) : Off
Laser rx power high alarm (Channel 1) : Off
Laser rx power low alarm (Channel 1) : On
Laser rx power high warning (Channel 1) : Off
Laser rx power low warning (Channel 1) : On
Laser rx power high alarm (Channel 2) : Off
Laser rx power low alarm (Channel 2) : On
Laser rx power high warning (Channel 2) : Off
Laser rx power low warning (Channel 2) : On
Laser rx power high alarm (Channel 3) : Off
Laser rx power low alarm (Channel 3) : On
Laser rx power high warning (Channel 3) : Off
Laser rx power low warning (Channel 3) : On
Laser rx power high alarm (Channel 4) : Off
Laser rx power low alarm (Channel 4) : On
Laser rx power high warning (Channel 4) : Off
Laser rx power low warning (Channel 4) : On
Laser bias current high alarm threshold : 15.000 mA
Laser bias current low alarm threshold : 1.000 mA
Laser bias current high warning threshold : 14.000 mA
Laser bias current low warning threshold : 2.000 mA
Laser output power high alarm threshold : 2.5119 mW / 4.00 dBm
Laser output power low alarm threshold : 0.2512 mW / -6.00 dBm
Laser output power high warning threshold : 1.9953 mW / 3.00 dBm
Laser output power low warning threshold : 0.3162 mW / -5.00 dBm
Module temperature high alarm threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low alarm threshold : -10.00 degrees C / 14.00 degrees F
Module temperature high warning threshold : 80.00 degrees C / 176.00 degrees F
Module temperature low warning threshold : -5.00 degrees C / 23.00 degrees F
Module voltage high alarm threshold : 3.5000 V
Module voltage low alarm threshold : 3.1000 V
Module voltage high warning threshold : 3.4700 V
Module voltage low warning threshold : 3.1400 V
Laser rx power high alarm threshold : 2.5119 mW / 4.00 dBm
Laser rx power low alarm threshold : 0.0794 mW / -11.00 dBm
Laser rx power high warning threshold : 1.9953 mW / 3.00 dBm
Laser rx power low warning threshold : 0.1000 mW / -10.00 dBm